There are some questions which are repeated very often in the CBSE Class 10 Science Board Exams. This article provides all the CBSE Class 10 science important questions 2025. In this article we have listed the most repeated questions in science class 10 with different marks. Be it MCQs (1 mark), very short answer type questions (2 marks), short-answer type questions (3 marks), or long-answer type questions (5 marks) - this article covers it all. Students can refer this article while preparing for their CBSE Class 10 Science Exam 2025.
CBSE Class 10 Science Important Questions Types
CBSE Class 10 Science Question Paper 2025 will include the following question types:
- 20 MCQs (1 mark each)
- 6 Short Answer Type Questions-I (2 marks each)
- 7 Short Answer Type Questions-II (3 marks each)
- 3 Long Answer Type Questions (5 marks each)
Students must practice and solve the given below important questions to test their understanding of main concepts. It also improves their accuracy and question-solving speed, along with their chances of scoring highly in the CBSE 10th Science Exam 2025.
CBSE Most Repeated Questions in Science Class 10
1 Mark Questions (MCQS)
1.The laws of reflection hold true for:
(a) plane mirrors only
(b) concave mirrors only
(c) convex mirrors only
(d) all reflecting surfaces
2.A student plots V-I graphs for three samples of nichrome wire with resistances R1, R2 and R3. Choose from the following statements that holds true for this graph.
(a) R1 = R2 = R3
(b) R1 > R2 > R3
(c) R3 > R2 > R1
(d) R2 > R1 > R3
3.When an object is kept within the focus of a concave mirror, an enlarged image is formed behind the mirror. This image is
(a) real
(b) inverted
(c) virtual and inverted
(d) virtual and erect
4.Assertion (A) :The metals and alloys are good conductors of electricity.
Reason (R) : Bronze is an alloy of copper and tin and it is not a good conductor of electricity.
(a) Both (A) and (R) are true and (R) is the correct explanation of the assertion (A).
(b) Both (A) and (R) are true, but (R) is not the correct explanation of the assertion (A).
(c) (A) is true, but (R) is false.
(d) (A) is false, but (R) is true.
5.The maximum resistance which can be made using four resistors each of 2 Ω is
(a) 2 Ω
(b) 4 Ω
(c) 8 Ω
(d) 16 Ω
6.Assertion (A) : Alloys are commonly used in electrical heating devices like electric iron and heater.
Reason (R): Resistivity of an alloy is generally higher than that of its constituent metals but the alloys have low melting points then their constituent metals.
(a) Both (A) and (R) are true and (R) is the correct explanation of the assertion (A).
(b) Both (A) and (R) are true, but (R) is not the correct explanation of the assertion (A).
(c) (A) is true, but (R) is false.
(d) (A) is false, but (R) is true.
7.Two bulbs of 100 W and 40 W are connected in series.ľhe current through the 100 W bulb is 1 A. The current through the 40 W bulb will be
(a) 0.4 A
(b) 0.6 A
(c) 0.8 A
(d) 1A
2 Marks Questions (Short Answer Type Questions-I)
1.In electrolysis of water, why is the volume of gas collected over one electrode double that of gas collected over the other electrode?
2.The reaction of metal X with Fe2O3 is highly exothermic and is used to join railway tracks. Identify metal X. Write the chemical equation for the reaction.
3.Which of the following listed metals can displace zinc from its salt solution? Give reason for your answer with a chemical equation: Copper, Lead, Magnesium, Silver
4.Write balanced chemical equation for the following reactions:
a.Hydrogen sulphide burns in air to give water and sulphur dioxide.
b.Barium chloride reacts in aqueous solution with zinc sulphate to give zinc chloride and barium sulphate.
5.What are the methods used by plants to get rid of excretory products?
6.Differentiate between saprophytic nutrition and parasitic nutrition based on the type of food and manner of obtaining it.
7.Bile juice does not contain any enzyme but bile salts are important for digestion and absorption of fats. State reason.
8.Trace the sequences of events through a reflex arc which occur when a bright light is focused on your eyes.
9.What is a dominant trait with respect to height in pea plant. Give any two examples.
10.What is the magnification of the images formed by plane mirrors and why?
11.An object is placed at a distance of 12 cm in front of a concave mirror of radius of curvature 30 cm. List four characteristics of the image formed by the mirror.
12.Draw a labelled ray diagram to show the path of the reflected ray corresponding to an incident ray of light parallel to the principal axis of a convex mirror. Mark the angle of incidence and angle of reflection on it.
3 Marks Questions (Short Answer Type Questions-II)
1.a.An ore on treatment with dilute hydrochloric acid produces brisk effervescence. What kind of ore is this? What steps will be required to obtain metal from the enriched ore?
b.Copper coin is kept immersed in silver nitrate solution for some time. What will happen to the coin and the colour of the solution? Write a balanced chemical equation for the reaction.
2.State the property utilised in the following:
a. Graphite in making electrodes.
b. Electric wires are coated with polyvinyl chloride (PVC) or rubber like materials.
c. Metal alloys are used for making bells and strings of music instruments.
3.Differentiate between Photosynthesis and Respiration.
4.In the electrolysis of water:
a.Name the gas collected at the cathode and anode respectively.
b.Why is volume of gas collected at one electrode double than that at the other? Name this gas.
c.How will you test this gas?
5.Give schematic representation of different pathways of breakdown of glucose molecule.
6.a.How is oxygen and carbon dioxide exchanged between blood and tissue? How are the gases transported in human being?
b.What is haemoglobin?
7.What is the fate of glucose molecule in:
a.Anaerobic respiration in Yeast and lactobacillus bacteria?
b.Aerobic respiration in human cells.
Write chemical equation for each type.
8.What is DNA copying? State its importance.
9.“It is a matter of chance whether a couple will have a male or a female child.” Justify this statement by drawing a flow chart.
10.Give reasons for the following:
a.Traits acquired during lifetime of an individual are not inherited.
b.All the human beings belong to a single species.
c.Variations keep on accumulating during reproduction and do not disappear in next generation.
11.List two properties of the images formed by convex mirrors. Draw ray diagram in support of your answer.
12.Name the type of mirrors used in the design of solar furnaces. Explain how high temperature is achieved by this device.
13.The linear magnification produced by a spherical mirror is +1/3. Analysing this value state the
(i) type of mirror and
(ii) position of the object with respect to the pole of the mirror.
Draw any diagram to justify your answer.
14.Draw ray diagrams for the following cases when a ray of light:
(i) passing through centre of curvature of a concave mirror is incident on it.
(ii) parallel to principal axis is incident on convex mirror.
(iii) is passing through focus of a concave mirror incident on it.
15.Show how would you join three resistors, each of resistance 9 Ω so that the equivalent resistance of the combination is (i) 13.5 Ω, (ii) 6 Ω
16.Calculate the resistivity of the material of a wire of length 1 m, radius 0.01 cm and resistance 20 ohms.
17.Two lamps, one rated 100 W; 220 V, and the other 60 W; 220 V, are connected in parallel to electric mains supply. Find the current drawn by two bulbs from the line, if the supply voltage is 220 V.
18.Explain the use of an electric fuse. What type of material is used for fuse wire and why?
19.Name the hormones secreted by the following endocrine glands and specify one function of each:
(a) Thyroid
(b) Pituitary
(c) Pancreas
20.Give reasons:
a. Pituitary is often termed as master endocrine gland.
b. Pancreas helps in digestion and also regulates blood sugar level.
c. Adrenals are known as glands of emergency.
21.Give the function(s) of the following plant hormones:
a. Auxins
b. Gibberellins
c. Cytokinins
d. Abscisic acid
e. Ethylene
5 Marks Questions (Long Answer Type Questions)
1.A metal (E) is stored under kerosene oil. When a small piece of it is left open in air, it catches fire. When the product formed is dissolved in water, it turns red litmus blue.
a.Name the metal (E).
b.Write the chemical equation for the reaction when it is exposed to air and when the product is dissolved in water.
c.Explain the process by which metal is obtained from its molten chloride.
2.Name a metal/non-metal
a.Which makes iron hard and strong?
b.Which is alloyed with other metal to make amalgam?
c.Which is used to galvanise iron articles?
d.Whose articles when exposed to air forms a black coating?
3.a.What are two vital functions of the human kidney?
b.Draw labelled diagram of human urinary system.
4.Give reason:
a.Carbonate and sulphide ores are usually converted into oxides during the process of extraction of metals.
b.Ionic compounds generally have high melting point.
c.Hydrogen is not a metal but has been assigned a place in the reactivity services of metals.
d.The galvanised iron article is protected against rusting even if the zinc layer is broken.
5.The image of a candle flame placed at a distance of 30 cm from a mirror is formed on a screen placed in front of the mirror at a distance of 60 cm from its pole. What is the nature of the mirror? Find its focal length. If the height of the flame is 2.4 cm, find the height of its image. State whether the image formed is erect or inverted.
6.a.Define excretion.
b.Name the basic filtration unit present in the kidney.
c.Draw excretory system in human beings and label the following organs of excretory system which perform following functions:
(i) form urine
(ii) is a long tube which collects urine from kidney.
(iii) store urine until it is passed out.
7.It is desired to obtain an erect image of an object, using a concave mirror of focal length of 12 cm.
(i) What should be the range of distance of a , object placed in front of the mirror?
(ii) Will the image be smaller or larger than the object? Draw ray diagram to show the formation of image in this case.
(iii) Where will the image of this object be, if it is placed 24 cm in front of the mirror? Draw ray diagram for this situation also to justify your answer.
Show the positions of pole, principal focus and the centre of curvature in the above ray diagrams.
8.The image of an object formed by a mirror is real, inverted and is of magnification -1. If the image is at a distance of 40 cm from the mirror, where is the object placed? Where would the image be if the object is moved 20 cm towards the mirror? State reason and also draw ray diagram for the new position of the object to justify your answer.
9.Two wires A and B are of equal length and have equal resistances. If the resistivity of A is more than that of B, which wire is thicker and why? For the electric circuit given below calculate:
(i) current in each resistor
(ii) total current drawn from the battery, and
(iii) equivalent resistance of the circuit.
10.Define resistance of a conductor. State the factors on which resistance of a conductor depends. Name the device which is often used to change the resistance without changing the voltage source in an electric circuit. Calculate the resistance of 50 cm length of wire of cross sectional area 0.01 square mm and resistivity 5 × 10-8 Ω m.
11.An electric lamp of resistance 20 Ω and a conductor of resistance 4 Ω. are connected to a 6 V battery as shown in the circuit. Calculate.
(a) the total resistance of the circuit
(b) the current through the circuit,
(c) the potential difference across the (i) electric lamp and (ii) conductor, and
(d) power of the lamp